Essential Guide to Explore Differences between CAT6A Cable Types

Essential Guide to Explore Differences between CAT6A Cable Types

  • 07 March, 2022
  • 445
  • 0

Nowadays, most of the structured cabling networks are adapted to move on CAT6A cable due to its ability of high data rate transmission. Cat6A Plenum UTP 750MHz 23 AWG Pure Copper 1000ft Cable can be described as cat Cat6A Plenum UTP Pure Copper 1000ft Cable Category 6A patch leads. It is emerging as a top cabling choice in the market especially for CCTV, VoIP and data networks because it allows transmission up to 10Gbps at 500 MHz frequency.

Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2Cables

Cat6A Plenum UTP 750MHz 23 AWG Pure Copper 1000ft Cable are specified for Class Ea networks usage and these offer transmissions up to 10Gbps and with 500Mhz frequency that is considered extremely high data rate transmission. These cables are the best choice for fastest Ethernet applications as Cat6A Plenum 23 AWG Pure Copper 1000ft Cablecompletely supports 10GBASE-T over 100 meter’s.

Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2Cables

Cat6A Plenum UTP 750MHz 23 AWG Pure Copper Cable can be categorized in two main standardized types: shielded and unshielded. These types are sometimes also mentioned as F/UTP and U/UTP. FTP and UTP terms are generally used to differentiate between shielded and unshielded cables. The ISO/IEC standards have explained the difference between two terms that first letters show the overall shield type whereas the latter letters tell about the shielding type on each pair as well as on the balanced element. Thus, it may be concluded that F/UTP and U/UTP are the simplest terms to differentiate between cable types.

Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2Cables

When it comes to Cat6A Plenum UTP 750MHz 23 AWG Pure Copper 1000ft Network Ethernet Cable U/UTP, this indicates that the cable has had 4 unshielded twisted pairs but it is also without outer shielding. On the other hand, Cat6A Plenum UTP 750MHz Pure Copper 1000ft Cable F/UTP contains 4 unshielded twisted pairs and outer foil shield; therefore, it would be shielded cable. The basic difference between both types is the presence of shield.


Additionally, another S/FTP-screened/foiled twisted pair-cable is also available in the market that is generally a CAT7 cable. It consists of four individually shielded pairs in addition with an outer screen that is braided around all pairs.


Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2Cables

Cat6A Plenum 750MHz 23 AWG Pure Copper 1000ft Cable U/UTP is designed with the purpose to help reduce cross talk and ANEXT. This contains various efficient features that further help to enhance the outer diameter of the cable. Larger conductors (at-least 23 AWG), additional internal airspace, thicker outer jacket, tighter twists, internal separator in between the pairs are few important constituents of this cable.


Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2CablesMeanwhile, CAT6A F/UTP is also made in the similar manner as of Cat6A Plenum 23 AWG Pure Copper 1000ft Cable U/UTP but it has an outer foil shield below the jacket of outer cable. The function of this foil shield is to prevent EMI/RFI from merging onto the twisted pairs of adjacent cables. Moreover, Cat6A Plenum 750MHz 23 AWG Pure Copper 1000ft Cable F/UTP returns the noise and interruption from lights, machinery and other EMI access points. It also prevents radio frequency interference (RFI) from cell phones and wireless sources. Interestingly, the foil shield obstructs the data signal leakage from the cable.

Cat6A Plenum Pure Copper Blue 1000ft UTP 750MHz 23 AWG Networking Cable Route2CablesYou must have a compatible shielded connector to be used along with shielded F/UTP CAT6A Cable in an installation. Similarly, unshielded connectors will be required to use along with unshielded cables.

There are various factors which impact on your decision whether to go for a shielded or unshielded cabling solution. These include ease of installation, cost, EMI, ANEXT and more to name a few.


You must consider all factors before deciding on the most suitable approach so your installed system can stay longer and can easily manage 10GBASE-T applications in the future. 

Tags Cat6A, Cat6A Cables, Plenum Cables, Route2Cables, Cat6A Plenum Cables, Ethernet Cat6A Cables, Cat6A Network Cables


Write a Comment

Note: HTML is not translated!